Electron shell

An electron shell may be thought of as an orbit followed by electrons around an atom's nucleus. The closest shell to the nucleus is called the "1 shell" (also called "K shell"), followed by the "2 shell" (or "L shell"), then the "3 shell" (or "M shell"), and so on further and further from the nucleus. The shell letters K, L, M, ... are alphabetical.

Each shell can contain only a fixed number of electrons: The 1 shell can hold up to two electrons, the 2 shell can hold up to eight electrons, and in general, the n shell can hold up to 2n2 electrons. Since electrons are electrically attracted to the nucleus, an atom's electrons will generally occupy outer shells only if the more inner shells have already been completely filled by other electrons. However, this is not a strict requirement: Atoms may have two or even three outer shells that are only partly filled with electrons. (See Madelung rule for more details.) For an explanation of why electrons exist in these shells see electron configuration.[1]

The electrons in the partially-filled outermost shell (or shells) determine the chemical properties of the atom; it is called valence shell.

Each shell consists of one or more subshells, and each subshell consists of one or more atomic orbitals.

Contents

History

The shell terminology comes from Arnold Sommerfeld's modification of the Bohr model. Sommerfeld retained Bohr's planetary model, but added mildly elliptical orbits (characterized by additional quantum numbers l and m) to explain the fine spectroscopic structure of some elements.[2] The multiple electrons with the same principal quantum number (n) had close orbits that formed a "shell" of finite thickness instead of the infinitely thin circular orbit of Bohr's model.

The existence of electron shells was first observed experimentally in Charles Barkla's and Henry Moseley's X-ray absorption studies. Barkla labeled them with the letters K, L, M, N, O, P, and Q. The origin of this terminology was alphabetic. A J series was also suspected, though later experiments indicated that the K absorption lines are produced by the innermost electrons. These letters were later found to correspond to the n-values 1, 2, 3, etc. They are used in the spectroscopic Siegbahn notation.

The physical chemist Gilbert Lewis was responsible for much of the early development of the theory of the participation of valence shell electrons in chemical bonding. Linus Pauling later generalized and extended the theory while applying insights from quantum mechanics.

Shells

The electron shells are labeled K, L, M, N, O, P, and Q; or 1, 2, 3, 4, 5, 6, and 7; going from innermost shell outwards. Electrons in outer shells have higher average energy and travel farther from the nucleus than those in inner shells. This makes them more important in determining how the atom reacts chemically and behaves as a conductor, because the pull of the atom's nucleus upon them is weaker and more easily broken. In this way, a given element's reactivity is highly dependent upon its electronic configuration.

Subshells

Each shell is composed of one or more subshells, which are themselves composed of atomic orbitals. For example, the first (K) shell has one subshell, called "1s"; the second (L) shell has two subshells, called "2s" and "2p"; the third shell has "3s", "3p", and "3d"; and so on.[1] The various possible subshells are shown in the following table:

Subshell label Max electrons Shells containing it Historical name
s 0 2 Every shell  sharp
p 1 6 2nd shell and higher  principal
d 2 10 3rd shell and higher  diffuse
f 3 14 4th shell and higher  fundamental
g 4 18 5th shell and higher (next in alphabet after f)[3]

Although it is commonly stated that all the electrons in a shell have the same energy, this is an approximation. However, the electrons in a subshell do have exactly the same level of energy,[4] with later subshells having more energy per electron than earlier ones. This effect is great enough that the energy ranges associated with shells can overlap (see Valence shells and Aufbau Principle).

Number of electrons in each shell

Shell
name
Subshell
name
Subshell
max
electrons
Shell
max
electrons
K 1s 2 2
L 2s 2 2+6=8
2p 6
M 3s 2 2+6+10
=18
3p 6
3d 10
N 4s 2 2+6+
+10+14
=32
4p 6
4d 10
4f 14

An atom's electron shells are filled according to the following theoretical constraints:

Therefore, the K shell, which contains only an s subshell, can hold up to 2 electrons; the L shell, which contains an s and a p, can hold up to 2+6=8 electrons; and so forth. The general formula is that the nth shell can in principle hold up to 2n2 electrons.

Although that formula gives the maximum in principle, in fact that maximum is only achieved (by known elements) for the first four shells (K,L,M,N). No known element has more than 32 electrons in any one shell.[5][6] This is because the subshells are filled according to the Aufbau principle. The first elements to have more than 32 electrons in one shell would belong to the g-block of period 8 of the periodic table. These elements would have some electrons in their 5g subshell and thus have more than 32 electrons in the O shell (fifth principal shell).

Valence shells

The valence shell is the outermost shell of an atom. It is usually (and misleadingly) said that the electrons in this shell make up its valence electrons, that is, the electrons that determine how the atom behaves in chemical reactions. Just as atoms with complete valence shells (noble gases) are the most chemically non-reactive, those with only one electron in their valence shells (alkalis) or just missing one electron from having a complete shell (halogens) are the most reactive.[7]

However, this is a simplification of the truth. The electrons that determine how an atom reacts chemically are those that travel farthest from the nucleus, that is, those with the most energy. As stated in Subshells, electrons in the inner subshells have less energy than those in outer subshells. This effect is great enough that the 3d electrons have more energy than 4s electrons, and are therefore more important in chemical reactions, making them valence electrons although they are not in the so-called valence shell.[8]

List of elements with electrons per shell

The list below gives the elements arranged by increasing atomic number and shows the number of electrons per shell. At a glance, one can see that subsets of the list show obvious patterns. In particular, the seven elements (in light blue) before a noble gas (group 18, in yellow) higher than helium have the number of electrons in the valence shell in arithmetic progression. (However, this pattern may break down in the seventh period due to relativistic effects.)

Sorting the table by chemical group shows additional patterns, especially with respect to the last two outermost shells. (Elements 57 to 71 belong to the lanthanides, while 89 to 103 are the actinides.)

The list below is primarily consistent with the Aufbau rule. However, there are a number of exceptions to the rule; for example palladium (atomic number 46) has no electrons in the fifth shell, unlike other atoms with lower atomic number. Some entries in the table are uncertain, when experimental data is unavailable. (For example, some atoms have such short half-life that it is impossible to measure their electron configurations).

Z Element No. of electrons/shell Group
1 Hydrogen 1 1
2 Helium 2 18
3 Lithium 2, 1 1
4 Beryllium 2, 2 2
5 Boron 2, 3 13
6 Carbon 2, 4 14
7 Nitrogen 2, 5 15
8 Oxygen 2, 6 16
9 Fluorine 2, 7 17
10 Neon 2, 8 18
11 Sodium 2, 8, 1 1
12 Magnesium 2, 8, 2 2
13 Aluminium 2, 8, 3 13
14 Silicon 2, 8, 4 14
15 Phosphorus 2, 8, 5 15
16 Sulfur 2, 8, 6 16
17 Chlorine 2, 8, 7 17
18 Argon 2, 8, 8 18
19 Potassium 2, 8, 8, 1 1
20 Calcium 2, 8, 8, 2 2
21 Scandium 2, 8, 9, 2 3
22 Titanium 2, 8, 10, 2 4
23 Vanadium 2, 8, 11, 2 5
24 Chromium 2, 8, 13, 1 6
25 Manganese 2, 8, 13, 2 7
26 Iron 2, 8, 14, 2 8
27 Cobalt 2, 8, 15, 2 9
28 Nickel 2, 8, 16, 2 10
29 Copper 2, 8, 18, 1 11
30 Zinc 2, 8, 18, 2 12
31 Gallium 2, 8, 18, 3 13
32 Germanium 2, 8, 18, 4 14
33 Arsenic 2, 8, 18, 5 15
34 Selenium 2, 8, 18, 6 16
35 Bromine 2, 8, 18, 7 17
36 Krypton 2, 8, 18, 8 18
37 Rubidium 2, 8, 18, 8, 1 1
38 Strontium 2, 8, 18, 8, 2 2
39 Yttrium 2, 8, 18, 9, 2 3
40 Zirconium 2, 8, 18, 10, 2 4
41 Niobium 2, 8, 18, 12, 1 5
42 Molybdenum 2, 8, 18, 13, 1 6
43 Technetium 2, 8, 18, 13, 2 7
44 Ruthenium 2, 8, 18, 15, 1 8
45 Rhodium 2, 8, 18, 16, 1 9
46 Palladium 2, 8, 18, 18 10
47 Silver 2, 8, 18, 18, 1 11
48 Cadmium 2, 8, 18, 18, 2 12
49 Indium 2, 8, 18, 18, 3 13
50 Tin 2, 8, 18, 18, 4 14
51 Antimony 2, 8, 18, 18, 5 15
52 Tellurium 2, 8, 18, 18, 6 16
53 Iodine 2, 8, 18, 18, 7 17
54 Xenon 2, 8, 18, 18, 8 18
55 Caesium 2, 8, 18, 18, 8, 1 1
56 Barium 2, 8, 18, 18, 8, 2 2
57 Lanthanum 2, 8, 18, 18, 9, 2
58 Cerium 2, 8, 18, 19, 9, 2
59 Praseodymium 2, 8, 18, 21, 8, 2
60 Neodymium 2, 8, 18, 22, 8, 2
61 Promethium 2, 8, 18, 23, 8, 2
62 Samarium 2, 8, 18, 24, 8, 2
63 Europium 2, 8, 18, 25, 8, 2
64 Gadolinium 2, 8, 18, 25, 9, 2
65 Terbium 2, 8, 18, 27, 8, 2
66 Dysprosium 2, 8, 18, 28, 8, 2
67 Holmium 2, 8, 18, 29, 8, 2
68 Erbium 2, 8, 18, 30, 8, 2
69 Thulium 2, 8, 18, 31, 8, 2
70 Ytterbium 2, 8, 18, 32, 8, 2
71 Lutetium 2, 8, 18, 32, 9, 2 3
72 Hafnium 2, 8, 18, 32, 10, 2 4
73 Tantalum 2, 8, 18, 32, 11, 2 5
74 Tungsten 2, 8, 18, 32, 12, 2 6
75 Rhenium 2, 8, 18, 32, 13, 2 7
76 Osmium 2, 8, 18, 32, 14, 2 8
77 Iridium 2, 8, 18, 32, 15, 2 9
78 Platinum 2, 8, 18, 32, 17, 1 10
79 Gold 2, 8, 18, 32, 18, 1 11
80 Mercury 2, 8, 18, 32, 18, 2 12
81 Thallium 2, 8, 18, 32, 18, 3 13
82 Lead 2, 8, 18, 32, 18, 4 14
83 Bismuth 2, 8, 18, 32, 18, 5 15
84 Polonium 2, 8, 18, 32, 18, 6 16
85 Astatine 2, 8, 18, 32, 18, 7 17
86 Radon 2, 8, 18, 32, 18, 8 18
87 Francium 2, 8, 18, 32, 18, 8, 1 1
88 Radium 2, 8, 18, 32, 18, 8, 2 2
89 Actinium 2, 8, 18, 32, 18, 9, 2
90 Thorium 2, 8, 18, 32, 18, 10, 2
91 Protactinium 2, 8, 18, 32, 20, 9, 2
92 Uranium 2, 8, 18, 32, 21, 9, 2
93 Neptunium 2, 8, 18, 32, 22, 9, 2
94 Plutonium 2, 8, 18, 32, 24, 8, 2
95 Americium 2, 8, 18, 32, 25, 8, 2
96 Curium 2, 8, 18, 32, 25, 9, 2
97 Berkelium 2, 8, 18, 32, 27, 8, 2
98 Californium 2, 8, 18, 32, 28, 8, 2
99 Einsteinium 2, 8, 18, 32, 29, 8, 2
100 Fermium 2, 8, 18, 32, 30, 8, 2
101 Mendelevium 2, 8, 18, 32, 31, 8, 2
102 Nobelium 2, 8, 18, 32, 32, 8, 2
103 Lawrencium 2, 8, 18, 32, 32, 8, 3 (?) 3
104 Rutherfordium 2, 8, 18, 32, 32, 10, 2 (?) 4
105 Dubnium 2, 8, 18, 32, 32, 11, 2 (?) 5
106 Seaborgium 2, 8, 18, 32, 32, 12, 2 (?) 6
107 Bohrium 2, 8, 18, 32, 32, 13, 2 (?) 7
108 Hassium 2, 8, 18, 32, 32, 14, 2 (?) 8
109 Meitnerium 2, 8, 18, 32, 32, 15, 2 (?) 9
110 Darmstadtium 2, 8, 18, 32, 32, 17, 1 (?) 10
111 Roentgenium 2, 8, 18, 32, 32, 17, 2 (?) 11
112 Copernicium 2, 8, 18, 32, 32, 18, 2 (?) 12
113 Ununtrium 2, 8, 18, 32, 32, 18, 3 (?) 13
114 Ununquadium 2, 8, 18, 32, 32, 18, 4 (?) 14
115 Ununpentium 2, 8, 18, 32, 32, 18, 5 (?) 15
116 Ununhexium 2, 8, 18, 32, 32, 18, 6 (?) 16
117 Ununseptium 2, 8, 18, 32, 32, 18, 7 (?) 17
118 Ununoctium 2, 8, 18, 32, 32, 18, 8 (?) 18

See also

References

  1. ^ a b Electron Subshells. Corrosion Source. Retrieved on 2011-12-01.
  2. ^ Donald Sadoway, Introduction to Solid State Chemistry, Lecture 5
  3. ^ Jue, T. (2009). "Quantum Mechanic Basic to Biophysical Methods". Fundamental Concepts in Biophysics. Berlin: Springer. p. 33. ISBN 1588299732. http://books.google.com/books?id=-W1bL7s--igC&pg=PA33. 
  4. ^ The statement that the electrons in a subshell have exactly the same level of energy is true in an isolated atom, where it follows quantum-mechanically from the spherical symmetry of the system. When the atom is part of a molecule, this no longer holds; see, for example, crystal field theory.
  5. ^ Orbitals. Chem4Kids. Retrieved on 2011-12-01.
  6. ^ Electron & Shell Configuration. Chemistry.patent-invent.com. Retrieved on 2011-12-01.
  7. ^ Chemical Reactions. Vision Learning (2011-07-26). Retrieved on 2011-12-01.
  8. ^ Atomic Orbitals. Chemguide. Retrieved on 2011-12-01.